![Machinist Blog - In The Loupe](https://embed.widencdn.net/svg/harveyperformance/7ix3bgrlz7/Helical_Icon_InTheLoupe_lg.svg?u=yl8u2r" alt="Helical_Icon_InTheLoupe_lg){kind=icon}
![Find A Tool](https://embed.widencdn.net/svg/harveyperformance/tsnkiaen3v/Helical_Icon_FindATool_Gray_lg.svg?u=yl8u2r" alt="Helical_Icon_FindATool_Gray_lg){kind=icon}
Simulation Files
Simulation File Search
Use the search below to find the Helical Solutions Simulation Files in .DXF or .STEP format which can be downloaded and imported into your CAD/CAM software of choice. Each file is specifically scaled to the geometry of the tool to help simulate running parameters and create tool paths. Like our Speeds & Feeds charts, these files will be continuously updated with the introduction of new products and new catalogs to assist in the operation of our tools.
*Simulation Files can also be downloaded directly from Tool Details Pages
What are Simulation Files?
Many cutting tools have complex profiles that are difficult to describe in a traditional catalog format. In these cases, it may be helpful to understand the tool's specific profile to confirm tool selection prior to purchasing. Using two universal file formats (.DXF or .STEP), the simulation file can be downloaded and imported directly into the CAM (Computer Aided Manufacturing) software package. In this way, the tool cutting parameters can be simulated and issues involving interference, dimensional accuracy and cycle times can be determined ahead of time allowing a more informed cutter choice.
.DXF Files
- 2D format
- Half profile
- All tooling available
- Tool center located at origin (0, 0)
.STEP Files
- 3D format
- Full Profile
- All tooling available
- Milling tools’ profile revolved at center line (0,0,0)
*Our Simulation Files are compatible with most common CAD and CAM software programs.